We have a senerio with some of our UCS domains. when we add a new storage array some paths will login to the array but not all will login until we reboot a host. We have 4 UCS domains 6140x, 6248 and 2 x 6296. the older 6140 seems to always login and have no issues the newer seems to only login a single path and sometimes none until a reboot of the blades occurs. the FI up link to Brocade 5300 FC switches. This does not appear Firmware related as the newer 6296 are on 2.2.3b and the other are on 2.1.3e until next main window. I am thinking there is some issues with the upstream brocades and RSCN passing toe th newer FI . Any thoughts and direction as i really don't want to spend the next month rebooting hosts.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...