This is my first time posting for this community corner and i just hope i didn't violate any rules for the first time poster. :D
I am using Nexus 1000v in our Cloud Service, we have 4 Blade ESXi clustered host and 2 Nexus 7000 directly connected from HP C7000 Enclosure. We've been using this setup for almost a year now then one day we started experiencing disconnection of some VMs. At first, the solution we made is to reboot the VM. But i found out that instead of rebooting the VM, i just do a 4 packets ping to its gateway. 2 packets were failed and then the succeeding packets are already successful. The issue has been repeatedly happening so what i did next is to leave a continuous ping from VM to its gateway. That permanently resolve the disconnection issue. When i came across the logs of N1Kv, i noticed the logs below pertaining to the disconnection of the VM;
2014 Sep 27 08:33:40 VPCMK2NETVSM001 %VIM-5-IF_DETACHED: Interface Vethernet178 is detached 2014 Sep 27 08:33:40 VPCMK2NETVSM001 %ETHPORT-5-IF_DOWN_NON_PARTICIPATING: Interface Vethernet178 is down (Non participating) 2014 Sep 27 08:33:40 VPCMK2NETVSM001 %VIM-5-IF_ATTACHED: Interface Vethernet178 is attached to Network Adapter 1 of SVRTRA001 on port 79 of module 6 with dvport i d 4199
Any one who also experience this? And/or anyone has an idea why was this happening?
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...