Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Nexus 1010 boot failed

Hi all,

I tried to boot nexus 1010, but only cimc can login. The serial console did not show any information, and still no response. So I tried to connect keyboard and monitor, both are no response. In addition, the nic port is down too.

Have any idea? Or who to troubleshooting it?

Sent from Cisco Technical Support iPhone App

6 REPLIES
Cisco Employee

Nexus 1010 boot failed

Hello Meng,

Are you able to access the CIMC via web browser ?

If yes, do you observe any error messages ?

Any output on the KVM console ?

Padma

New Member

Re: Nexus 1010 boot failed

Hello Padma,

Are you able to access the CIMC via web browser ?

-> Yes.

If yes, do you observe any error messages ?

-> No! All the status is "Good".

Any output on the KVM console ?

-> No! The KVM show "No Signal".

Sent from Cisco Technical Support iPhone App

Cisco Employee

Re: Nexus 1010 boot failed

Hello Meng,

Has this server worked before ?

Are you able to access the N1010 host CLI interface by doing SSH to CIMC IP address ?

ssh admin@

connect host

Padma

New Member

Re: Nexus 1010 boot failed

Hello Padma,

Has this server worked before ?

-> Yes.

Are you able to access the N1010 host CLI interface by doing SSH to CIMC IP address ?

-> Yes.

ssh admin@ "connect host" did not show any response, and console can not return to CIMC.

Sent from Cisco Technical Support iPhone App

Cisco Employee

Re: Nexus 1010 boot failed

When you reboot N1010 from the KVM console, do you see any output?

New Member

Re: Nexus 1010 boot failed

Hi Yasemin,

After few day later. We used front panel port to connect monitor and keyboard, mouse and reboot it. It is work. But the back of the monitor port still did not work. BTW, the system can work now.

829
Views
0
Helpful
6
Replies
CreatePlease to create content