I have a question about UCS and FCoE – I don’t have a solution for my problem
I configured my UCS with UCSM 2.1(3a) with a FCoE Uplink, default vsan, fcoe VLAN 99 – and the upstream nexus 5548up (nx-os 5.1.3) with npiv and fcoe features – everything works fine except end to end connectivity. My virtual HBA has done the flogi perfectly, but in the fcns the fc4 type is missing so I can’t reach storage or other things. fcping works but thats all – no other connectivity.
The Blades are B200 M3 with VIC1240, all firmware from new 2.1(3a) release. Zoning seems to be correct, system qos settings are fine on my 5548 but now im running out of ideas. Sadly I don't have full access to the 5548.
Do anyone have an idea or a thing I could do / check? I tried restarting the blades / fi’s but nothing works.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...