Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NVIDIA with c-series integration in UCS

Hello,

Is it possible/supported to integrate C-240M3 with NVIDIA cards in a UCS Fabric Interconnect environment? I guess UCS Service Profiles don't know about NVIDIA cards, so I'm wondering how will the hypervisor know about its existence.

Thanks a lot,

3 REPLIES
Cisco Employee

Have a look athttp://www

Have a look at

http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/nvidia_grid_vgx.pdf

 

At a high level. 

 

 

 

edit: I noticed your question is specific to integration with UCSM. For UCSM it will just be seen as s PCIe device. Just remember to have latest greatest on your C240 (1.5.4+)

New Member

So (provided we have last

So (provided we have last firmware) you can confirm that the scenario won't pose any problems or concerns? It will simply work as if it was a standalone server?

Thanks

Cisco Employee

In essence UCSM should see

In essence UCSM should see them as a PCI card it cannot automatically update or apply GPU service profiles to. That's meant as an interim step, AFAIU. 

That being said, I would still check this out with your SE, to see how you will be deploying it and what are the limitations, guidelines. 

53
Views
0
Helpful
3
Replies