Hello, I have 2 ucs 6120XP clustered and I cannot access them remotely. Routing is OK, local ping is OK, but when I try to ping the virtual IP address or the management ip for each unit there is no response.
Yes, they are in the same vlan and subnet. I have 2 SVIs, the one in the same vlan and subnet responds ok, as it is local, but when I ping from the switch using as source the other SVI I get no response.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...