09-02-2014 01:31 PM - edited 03-01-2019 11:49 AM
Hello
Are there any possible side effects of renaming a service profile for firmwares 2.1 and above? Will anything else need to be re-configured in the service profile?
Solved! Go to Solution.
09-03-2014 07:57 AM
09-02-2014 08:04 PM
Hello Brett,
For more information on service profile, check the below links.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-1/b_UCSM_GUI_Configuration_Guide_2_1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_0100001.html
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/users-manual/1-1/b_CiscoUCSCentral-Software-UsersManual-Release1-1/b_CiscoUCSCentral-Software-UsersManual-Release1-1_chapter_01010.html
www.kozeniauskas.com/itblog/2013/06/13/ucs-how-to-move-or-rename-service-profile-in-ucs/
Regards
Keshav
09-02-2014 09:55 PM
Hi,
Starting from UCS version 2.1 there is an option to rename service-profiles in UCS. If you’re running 2.0 or lower then the only way to rename is to clone service profile make some changes and delete the original
Rename service profile in CLI following are steps.
09-03-2014 07:57 AM
Brett,
Nothing else should be needed.
-Kenny
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide