Server 2008SP2 raid controller driver for UCS C200M1?
Since Windows 2008 is a couple years old, it doesn't have a built in raid controller driver for UCS C200M1 servers.Windows did not discover the RAID controller in the server, and none of the drivers I've downloaded from Cisco appear to be correct.
Setting this up for Cisco Secure ACS 4.2(1), thought maybe someone here had played with some UCS C-Series gear...
If this is the case, once you've configured BIOS and the ICH10R lun, you'll need to load the storage driver. It's under the Intel folder in the drivers IOS for storage. Reason? Its included in Intel's chip set even though it's labeled LSI.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...