I have seen that issue before being related to a power problem with the motherboard, but the issue might need further investigation.
Since there are too many commands I can request you to run to analyze this, instead of making you spend time here (this is a great place to get answers, dont get me wrong), I better recommend you to open a case with TAC as I know I will probably end up asking you to do that.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...