cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7752
Views
0
Helpful
5
Replies

Setting the time in CIMC

Brett Williston
Level 1
Level 1

Newbie question.. but how do I set the time in CIMC?                  

2 Accepted Solutions

Accepted Solutions

Manuel Velasco
Cisco Employee
Cisco Employee

Hi Brett,

The CIMC grabs it's time from BIOS. If you want to change the time you would have to get into the bios and change the time there.

View solution in original post

What type of server do you have?

Is it a c-series server?

To get into the bios you will have to reboot your server, and preset F2 when a little bit after you see the cisco logo.

View solution in original post

5 Replies 5

Manuel Velasco
Cisco Employee
Cisco Employee

Hi Brett,

The CIMC grabs it's time from BIOS. If you want to change the time you would have to get into the bios and change the time there.

Manuel Velasco
Cisco Employee
Cisco Employee

Hi Brett,

Please let me know if this is what you were looknig for. 

Thank you Manuel.

Is there any other way? I am very new to these Cisco UCS' and not really sure how I would access the BIOS.

What type of server do you have?

Is it a c-series server?

To get into the bios you will have to reboot your server, and preset F2 when a little bit after you see the cisco logo.

Thank you Manuel. Worked like a charm.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: