Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Software failure in FI 6120

Hi,


I have got one UCS for lab practice but when I started the FI 6120 i found on console that it is in loader mode.


I also tried to reboot it twice or thrice but still it is in same state. When I tried with dir command I found there is nothing in its bootflash. The output is below for your reference.

loader> dir

bootflash:

  lost+found

loader> boot

Error 30: Invalid argument. Please do "help <cmd_name>" to get the usage

Also i found that kickstart image to boot UCS is not publically available to download. Please suggest if I can recover this FI to normal mode.

Thanks & Regards,

Shaheen Sidana

  • Unified Computing
3 REPLIES
New Member

Software failure in FI 6120

Hi,

the problem as same, my FI 6120 firmware is crash.

you need 3 file:

- ucs-6100-xx-kickstart.xxxx.bin

- ucs-6100-xx-system.xxx.bin

- ucs-manager-xxxx.bin

to get 3 file do you call TAC, because the file not publish.

for step:

1. do you put 3 file to tftp server.

2. set ip FI

3. boot kickstar from tftp.

3. copy 3 file to FI

for more details please go to https://supportforums.cisco.com/thread/2031470

sendi

New Member

Software failure in FI 6120

Hi Sendi,

I called TAC but TAC engineer also published the same bundle for me which I downloaded from my CCO. TAC engineer also told that these three files are the part of same bundle but I am unable to extract the bundle file as it is in .bin format.

Please help if any how I can get these three files or what should I ask from TAC engineer.

Thanks & Regards,

Shaheen Sidana

New Member

Re: Software failure in FI 6120

Hi,

yes the file from TAC engginer. do you open case.

because the image FI is crash so the image need new install.

sendi

382
Views
0
Helpful
3
Replies