Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UCS 6248UP to UCS 2104XP AND UCS 6120XP to UCS 2208XP

Hi,

  1. Is the UCS 6248UP compatible with the UCS 2104XP? AND
  2. Is the UCS 6120XP compatible with the UCS 2208XP?

 

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi Michael, The FI's paring

Hi Michael,

 

The FI's paring with the IOM's should not matter.

With 2208 the number for back plane ports increase to 32 , while they are 8 with 2104.

 

The only requirment is to have a  minimum software version of 2.0(1m)

 

Please refer the below link to confirm the same.

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/OL_25363.html#pgfId-49903

 

Thanks,

Majid

1 REPLY
Cisco Employee

Hi Michael, The FI's paring

Hi Michael,

 

The FI's paring with the IOM's should not matter.

With 2208 the number for back plane ports increase to 32 , while they are 8 with 2104.

 

The only requirment is to have a  minimum software version of 2.0(1m)

 

Please refer the below link to confirm the same.

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/OL_25363.html#pgfId-49903

 

Thanks,

Majid

149
Views
0
Helpful
1
Replies