Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UCS B service profile health:inoperable and my server front red light.

         HI ,all

UCS B service profile health:inoperable and my server front  red light.

description:health:inoperable

id;225695

type equipment

cause:equipment-inoperable

code:F0317

I do this ,the major  can not OK. but the server is work good

fltComputePhysicalInoperable

Fault Code:F0317

Message

Server [id] (service profile: [assignedToDn]) health:  [operability]Server [chassisId]/[slotId] (service profile:  [assignedToDn]) health: [operability]

Explanation

This fault typically occurs when the server has encountered a diagnostic failure.

Recommended Action

If you see this fault, take the following actions:


Step 1 If the fault occurs in the Cisco UCS Manager GUI, capture one or more screenshots of the fault message and other related areas.

Step 2 Check  the POST results for the server.In Cisco UCS Manager GUI, you can  access the POST results from the General tab for the server. In Cisco  UCS Manager CLI, you can access the POST results through the show post command under the scope for the server.

Step 3 Reacknowledge the server.

Step 4 If the above actions did not resolve the issue, execute the show tech-support command and contact Cisco Technical Support.

fault doct

http://www.cisco.com/en/US/docs/unified_computing/ucs/ts/faults/reference/UCS_SEMs.html

what theis question?

Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

UCS B service profile health:inoperable and my server front red

Hello,

Please open a TAC SR to get CMOS battery replaced for Server 1/1. After you replace it, service profile inoperable alert would also get cleared out.

Padma

UCS B service profile health:inoperable and my server front red

Hailin,

You may check the CMOS voltage yourself to see the current charge, run the following:

A# connect cimc x/y      x= chassis  y= blade

Trying 127.5.x.y...

Connected to 127.5.x.y.

Escape character is '^]'.

CIMC Debug Firmware Utility Shell [ support ]

[ help ]# sensors    <<<< The output is extensive, but look for P3V_BAT_SCALED it is generally at the beginning but may vary.  This will let you check is the voltage is within the accepted range.

I hope that helps before you open the SR tomorrow.

Always rate helpful answers!

-Kenny

9 REPLIES
Cisco Employee

UCS B service profile health:inoperable and my server front red

Hello Hailin,

Can you please scope into server and execute " show fault " command and share the command with us ?

Thanks

Padma

New Member

Re: UCS B service profile health:inoperable and my server front

                    is this show tech can use?

the next wokr  day ,i can konw the "show fault "

 

thank you .

New Member

Attachment has been removed

Attachment has been removed to comply to the CSC terms of use conditions.    

New Member

Re: UCS B service profile health:inoperable and my server front

HI ,thank you .

this is your need. 

admin-A /chassis # show fault

admin-A /chassis # show fault

Severity  Code     Last Transition Time     ID       Description

--------- -------- ------------------------ -------- -----------

Major     F0317    2013-09-12T06:38:12.755    226717 Server 1/1 (service profile

: org-root/ls-EMRS-sys1) health: inoperable

Info      F0461    2013-09-12T06:38:12.755    226718 Log capacity on Management

Controller on server 1/1 is very-low

Minor     F0424    2013-09-12T06:38:12.754    226716 Possible loss of CMOS setti

ngs: CMOS battery voltage on server 1/1 is lower-critical

Major     F0408    2013-08-24T01:16:50.203    214936 Power state on chassis 1 is

redundancy-failed

Info      F0440    2013-01-17T07:56:09.310    213451 Chassis discovery policy co

nflict: Link IOM 1/2/1 to fabric interconnect B:1/1 not configured

Major     F0401    2013-01-17T07:56:09.310    213452 IOM 1/2 (B) current connect

ivity does not match discovery policy: unsupported-connectivity

Major     F0399    2013-01-17T07:47:49.170    213446 Current connectivity for ch

assis 1 does not match discovery policy: unsupported-connectivity

Info      F0461    2013-01-04T11:38:23.298    213387 Log capacity on Management

Controller on server 1/2 is very-low

Info      F0461    2013-01-02T03:53:30.183    213359 Log capacity on Management

Controller on server 1/3 is very-low

Info      F0440    2012-12-17T01:22:55.275    151707 Chassis discovery policy co

nflict: Link IOM 1/1/1 to fabric interconnect A:1/2 not configured

Major     F0401    2012-12-17T01:22:51.531     85697 IOM 1/1 (A) current connect

ivity does not match discovery policy: unsupported-connectivity

Warning   F0378    2012-11-30T05:27:22.614     54688 Power supply 4 in chassis 1

presence: missing

------------------------------

admin-A /chassis # show fault detail

Fault Instance

Severity: Major

Code: F0317

Last Transition Time: 2013-09-12T06:38:12.755

ID: 226717

Status: None

Description: Server 1/1 (service profile: org-root/ls-EMRS-sys1) health: inoperable

Affected Object: sys/chassis-1/blade-1

Name: Compute Physical Inoperable

Cause: Equipment Inoperable

Type: Equipment

Acknowledged: No

Occurrences: 1

Creation Time: 2013-09-12T06:38:12.755

Original Severity: Major

Previous Severity: Major

Highest Severity: Major

Severity: Info

Code: F0461

Last Transition Time: 2013-09-12T06:38:12.755

ID: 226718

Status: None

Description: Log capacity on Management Controller on server 1/1 is very-low

Affected Object: sys/chassis-1/blade-1/mgmt/log-SEL-0

Name: Sysdebug Mep Log M Ep Log Very Low

Cause: Log Capacity

Type: Operational

Acknowledged: No

Occurrences: 1

Creation Time: 2013-09-12T06:38:12.755

Original Severity: Info

Previous Severity: Info

Highest Severity: Info

Severity: Minor

Code: F0424

Last Transition Time: 2013-09-12T06:38:12.754

ID: 226716

Status: None

Description: Possible loss of CMOS settings: CMOS battery voltage on server 1/1 is lower-critical

Affected Object: sys/chassis-1/blade-1/board

Name: Compute Board Cmos Voltage Threshold Critical

Cause: Voltage Problem

Type: Environmental

Acknowledged: No

Occurrences: 1

Creation Time: 2013-09-12T06:38:12.754

Original Severity: Minor

Previous Severity: Minor

Highest Severity: Minor

Severity: Major

Code: F0408

Last Transition Time: 2013-08-24T01:16:50.203

ID: 214936

Status: None

Description: Power state on chassis 1 is redundancy-failed

Affected Object: sys/chassis-1

Name: Equipment Chassis Power Problem

Cause: Power Problem

Type: Environmental

Acknowledged: Yes

Occurrences: 1

Creation Time: 2013-08-24T01:16:50.203

Original Severity: Major

Previous Severity: Major

Highest Severity: Major

Severity: Info

Code: F0440

Last Transition Time: 2013-01-17T07:56:09.310

ID: 213451

Status: None

Description: Chassis discovery policy conflict: Link IOM 1/2/1 to fabric interconnect B:1/1 not configured

Affected Object: sys/chassis-1/slot-2/fabric/port-1

Name: Ether Switch Intfio Satellite Wiring Numbers Unexpected

Cause: Unexpected Number Of Links

Type: Connectivity

Acknowledged: No

Occurrences: 2

Creation Time: 2013-01-17T07:47:49.183

Original Severity: Info

Previous Severity: Cleared

Highest Severity: Info

Severity: Major

Code: F0401

Last Transition Time: 2013-01-17T07:56:09.310

ID: 213452

Status: None

Description: IOM 1/2 (B) current connectivity does not match discovery policy: unsupported-connectivity

Affected Object: sys/chassis-1/slot-2

Name: Equipment Iocard Unsupported Connectivity

Cause: Serial Debug Pnuosdisconnect Failed

Type: Connectivity

Acknowledged: Yes

Occurrences: 2

Creation Time: 2013-01-17T07:47:49.184

Original Severity: Major

Previous Severity: Cleared

Highest Severity: Major

Severity: Major

Code: F0399

Last Transition Time: 2013-01-17T07:47:49.170

ID: 213446

Status: None

Description: Current connectivity for chassis 1 does not match discovery policy: unsupported-connectivity

Affected Object: sys/chassis-1

Name: Equipment Chassis Unsupported Connectivity

Cause: Serial Debug Pnuosdisconnect Failed

Type: Connectivity

Acknowledged: Yes

Occurrences: 1

Creation Time: 2013-01-17T07:47:49.170

Original Severity: Major

Previous Severity: Major

Highest Severity: Major

Severity: Info

Code: F0461

Last Transition Time: 2013-01-04T11:38:23.298

ID: 213387

Status: None

Description: Log capacity on Management Controller on server 1/2 is very-low

Affected Object: sys/chassis-1/blade-2/mgmt/log-SEL-0

Name: Sysdebug Mep Log M Ep Log Very Low

Cause: Log Capacity

Type: Operational

Acknowledged: Yes

Occurrences: 1

Creation Time: 2013-01-04T11:38:23.298

Original Severity: Info

Previous Severity: Info

Highest Severity: Info

Severity: Info

Code: F0461

Last Transition Time: 2013-01-02T03:53:30.183

ID: 213359

Status: None

Description: Log capacity on Management Controller on server 1/3 is very-low

Affected Object: sys/chassis-1/blade-3/mgmt/log-SEL-0

Name: Sysdebug Mep Log M Ep Log Very Low

Cause: Log Capacity

Type: Operational

Acknowledged: Yes

Occurrences: 1

Creation Time: 2013-01-02T03:53:30.183

Original Severity: Info

Previous Severity: Info

Highest Severity: Info

Severity: Info

Code: F0440

Last Transition Time: 2012-12-17T01:22:55.275

ID: 151707

Status: None

Description: Chassis discovery policy conflict: Link IOM 1/1/1 to fabric interconnect A:1/2 not configured

Affected Object: sys/chassis-1/slot-1/fabric/port-1

Name: Ether Switch Intfio Satellite Wiring Numbers Unexpected

Cause: Unexpected Number Of Links

Type: Connectivity

Acknowledged: No

Occurrences: 6

Creation Time: 2012-12-10T06:51:40.268

Original Severity: Info

Previous Severity: Cleared

Highest Severity: Info

Severity: Major

Code: F0401

Last Transition Time: 2012-12-17T01:22:51.531

ID: 85697

Status: None

Description: IOM 1/1 (A) current connectivity does not match discovery policy: unsupported-connectivity

Affected Object: sys/chassis-1/slot-1

Name: Equipment Iocard Unsupported Connectivity

Cause: Serial Debug Pnuosdisconnect Failed

Type: Connectivity

Acknowledged: Yes

Occurrences: 11

Creation Time: 2012-12-03T01:02:45.450

Original Severity: Major

Previous Severity: Cleared

Highest Severity: Major

Severity: Warning

Code: F0378

Last Transition Time: 2012-11-30T05:27:22.614

ID: 54688

Status: None

Description: Power supply 4 in chassis 1 presence: missing

Affected Object: sys/chassis-1/psu-4

Name: Equipment Psu Missing

Cause: Equipment Missing

Type: Equipment

Acknowledged: No

Occurrences: 1

Creation Time: 2012-11-30T05:27:22.614

Original Severity: Warning

Previous Severity: Warning

Highest Severity: Warning

  admin-A /chassis #    

admin-A /chassis #

admin-A /chassis #

admin-A /chassis # show fa

fabric      fan-module  fault      

admin-A /chassis # show fault

Cisco Employee

UCS B service profile health:inoperable and my server front red

Hello,

Please open a TAC SR to get CMOS battery replaced for Server 1/1. After you replace it, service profile inoperable alert would also get cleared out.

Padma

New Member

UCS B service profile health:inoperable and my server front red

thanke you .may be  this problem.

but,before two weeks, we have open TAC SR to get CMOS battery replaced for Server 1/1.

is it the  Motherboard problem.?

tomorrom,i will open tac sr to get new cmos battery.

UCS B service profile health:inoperable and my server front red

Hailin,

You may check the CMOS voltage yourself to see the current charge, run the following:

A# connect cimc x/y      x= chassis  y= blade

Trying 127.5.x.y...

Connected to 127.5.x.y.

Escape character is '^]'.

CIMC Debug Firmware Utility Shell [ support ]

[ help ]# sensors    <<<< The output is extensive, but look for P3V_BAT_SCALED it is generally at the beginning but may vary.  This will let you check is the voltage is within the accepted range.

I hope that helps before you open the SR tomorrow.

Always rate helpful answers!

-Kenny

New Member

UCS B service profile health:inoperable and my server front red

hi ,dear;

this log :

bba | 01/02/2013 19:39:53 | CIMC | Voltage P3V_BAT_SCALED #0x00 | Lower critical - going low | Asserted | Reading 2.42 < Threshold 2.42 Volts

   bbb | 01/02/2013 19:39:54 | CIMC | Platform alert LED_BLADE_STATUS #0x57 | LED color is amber | Asserted

   bbc | 01/02/2013 19:40:00 | CIMC | Voltage P3V_BAT_SCALED #0x00 | Lower critical - going low | Deasserted | Reading 2.46 > Threshold 2.42 Volts

   bbd | 01/02/2013 19:40:00 | CIMC | Platform alert LED_BLADE_STATUS #0x57 | LED color is green | Asserted

   bbe | 01/02/2013 19:40:02 | CIMC | Voltage P3V_BAT_SCALED #0x00 | Lower critical - going low | Asserted | Reading 2.42 < Threshold 2.42 Volts

   bbf | 01/02/2013 19:40:02 | CIMC | Platform alert LED_BLADE_STATUS #0x57 | LED color is amber | Asserted

   bc0 | 01/02/2013 19:40:03 | CIMC | Voltage P3V_BAT_SCALED #0x00 | Lower critical - going low | Deasserted | Reading 2.46 > Threshold 2.42 Volts

is it the CMOS voltage  1 question?

UCS B service profile health:inoperable and my server front red

Hailin,

Yes, the P3V_BAT_SCALED    is the CMOS battery and yes that is the voltage read.  You can also check that in real time with the command I pasted above.

-Kenny

9745
Views
0
Helpful
9
Replies