We have Cisco UCS 5108 chassis full of B200 M3 blades. We installed Vmware on each blade and each blade has unique MAC and unique IP. MAC inside vmware matches the mac inside UCS manager for each particular blade.
The problem is if i power one server i can ping it and connect to it. When i power 2nd server and it comes online, i can't ping 1st server anymore. If i power on 3rd server i can ping it but then i can't ping server1 or server2. All servers are on same blade chassis so it looks like a network problem within chassis. The problem is interesting and i can't find any logic in this. Anyone had similar issues?
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
With Vignesh R. P.Welcome to the Cisco Support Community Ask the Expert
conversation.This is an opportunity to learn and ask questions of Cisco
expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and
support for the Cisco NX-OS Software platf...