Does UCSM REQUIRE that the CIMC obtain an IP address from the ext-mgmt pool in order to fully discovery the blade and place in inventory ?? or can/does it use an internal 127. address in absence of ext-mgmt yet being created in order to complete discovery of the blade inventory ??
My thought was that until I populated the ext-mgmt pool with a block of ip addresses to be handed out to the CIMC cards the discovery process didn't kick off. I'm now being told that's not the case and with newer versions having more insight to see CIMC sessions etc on the 127. network need to know exact process.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...