Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

UCS C 220 server teaming on two core switches.

Hello Everyone,

I am using UCS C 220 M3 server and it has 8 HDD. I created RAID for redundancy and installed call manager custom software on it. Now in the network topology there are two core switches. I connected the UCS server on first core switch from Gig port 1 of the server.

Now client is Demanding to connect on other core switch also. I am aware of the concept of teaming and i did it many times on microsoft server but either on the single switch or on the VSS system

Here the scenario is core switch 1 and cor switch 2 are two seperate device. Indeed there is a ether channel between them but these switches are not virtual.

Kindly suggest the solution how i can achieve the redundancy for UCS 220 server.

Thanks in Advance.

Please reply.