UCS C210M2 - Server not booting after CIMC firmware upgrade
After upgrading CIMC to 1.2(1a) firmware, server is not booting. Stops at "... checking hardware" and restarts itself. What can be done? Can I connect to serial console (need serial cable pinout) and boot CIMC with the backup firmware?
Re: UCS C210M2 - Server not booting after CIMC firmware upgrade
If the server is not getting passed the memory tests/hardware self checks, this sounds like a hardware issue, or a corrupt firmware version. You might want to contact Cisco TAC to get this investigated further.
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...
RBAC users like email@example.com may fail HX Connect login. At that time, "Incorrect user name or password(100005)" is shown as a failure reason.
RBAC users can login to vCenter server. So, RBAC username and passwo...