Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UCS C220 M3 FlexFlash warning

          Hi,

We have UCS C220 M3 hosting Unified Comminications application CUCM CUC IM&P UCCX.

In CICM / Storage : Cisco FlexFlash appears with a warning "Raid Degraded" because there is only one SD card provided by default in the server. We have no use of it and it is in state "Disconnected".

Q: Is it possible to disable this warning

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

UCS C220 M3 FlexFlash warning

Hi Rich,

Do you have the OS installed on the SD card? If you do you will have to install the second SD card and sycn the hypervisor partition.  If you are not using the SD card and you want to get rid of this message you will have to remove the SD card from the server and reboot the CIMC (See release notes below).

Cisco Flexible Flash Controller

http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/OL-28995-01.html

2 REPLIES
Cisco Employee

UCS C220 M3 FlexFlash warning

Hi Rich,

Do you have the OS installed on the SD card? If you do you will have to install the second SD card and sycn the hypervisor partition.  If you are not using the SD card and you want to get rid of this message you will have to remove the SD card from the server and reboot the CIMC (See release notes below).

Cisco Flexible Flash Controller

http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/OL-28995-01.html

New Member

UCS C220 M3 FlexFlash warning

Hi Manuel,

Thank you for your answer.

Nothing installed on the SD card.  ESXi installed on the Raid5 array.

Kind Regards

590
Views
0
Helpful
2
Replies
CreatePlease login to create content