Solved: Hi jcontreras, You want to

Joel Benicio Contreras Cid · ‎05-08-2014

Hello,

I have a UCS C220 M3 server. with 8 hard drives in it. I am going to install only CUCM and Unity on this server. (4K users).

The server comes without RAID configuration.

Cisco recommends RAID 5. I hoped use a RAID 6.
The space is reduced from 1.9 to 1.6.

Could there be any further problem when using RAID 6 on this server?.

Manuel Velasco · ‎05-08-2014

Hi jcontreras,

You want to make sure you follow Cisco recommendations to continue getting support from TAC in case you run into any problems with your set up.

Please take a look at the post below, see first comment from Daniel Laden.

https://supportforums.cisco.com/discussion/11692236/ucs-c220-m3-raid-configuration

Let me know if this help

Manuel Velasco · ‎05-08-2014

Hi jcontreras,

You want to make sure you follow Cisco recommendations to continue getting support from TAC in case you run into any problems with your set up.

Please take a look at the post below, see first comment from Daniel Laden.

https://supportforums.cisco.com/discussion/11692236/ucs-c220-m3-raid-configuration

Let me know if this help

UCS C220 M3 raid 6