I am using UCS Central 1.1.1a and have spun up couple of UCS Emulators to see how the UCS central works. I was able to register the UCS central on 2 UCS Manager domains. But these UCSM are not being displayed on the UCS Central GUI. Do I have to create any policy for the UCSM to show up in Central?
Unfortunately, there’s a version lock compatibility issue. UCSM 2.1.1 (and PE 2.1.1a) will only work with UCS Central 1.0. UCS Central 1.1(released just yesterday) will only work with UCSM 2.1.2 --- and the corresponding PE, when it becomes available. So for now, the only way to work with UCS Central 1.1 is going to be with physical domains, not emulators.
Please stand by as the new PE for 2.1.2 will be available shortly.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...