I have a number of UCS-140S deployed in our retail stores at various firmware revisions (1.0.2, 2.0.0, and 2.1.0). Attempting to update the firmware from the CIMC using either the individual BIOS/CIMC updates or booting into the HUU 2.1.1 causes me to lose my CIMC connection and then we have to reset the CIMC from within the router. The switch ports have been hardcoded to 100Mb Full as well as AUTO but it doesn't appear to make a difference. This is extremely frustrating and I'm not able to reliably update firmware in my retail store servers. Please let me know if you've seen this issue before and if there is a solution. Thanks in advance.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...