Hello, we are using without problem local zoning in UCS domains with FI 6248UP v. 2.2.x (FC switch mode, VSANs, storage policies, vHBA initiators in service profiles and so on ...) and it works like a charm for the blade servers. What if we would like to zone a non-UCS server (initiator) in order to see the same storage resources (target) already zoned for the UCS blades? Is it possible? Thanks Regards Gianni
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...