Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UCS Release Notes 2.2 (1d) and newer

Hey Community,

 

Am I blind or doesn't exists Release Notes for UCS 2.2 (1d) and newer?

http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/ucs_2_2_rn.html

If I open the release notes for 2.2, only information about 2.2(1b) and 2.2(1c) is given. Is that right?

Can I find some information about the newer releases somewhere else?

 

Thanks

Hugo

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Red

I cannot find some new

I cannot find some new information about changes in 2.2(1d), 2.2(1e), 2.2(2c), 2.2(2d) and 2.2(3a).

Did you check the section "new hardware features in 2.2" new software features in 2.2" in the same document I was referring to ?

New Hardware Features in Release 2.2

Release 2.2(3a) adds support for the following:

  • Cisco UCS B200 M4 servers shipping with Intel E5-2600 v3 series CPUs
  • Cisco UCS C220 M4/C240 M4 servers shipping with Intel E5-2600 v3 Series CPUs
  • Cisco UCS VIC 1227 adapter modular LOM (mLOM) for Cisco UCS C220 M4 & C240M4 servers
  • Cisco UCS VIC 1340 and VIC 1380 adapters modular LOM (mLOM) for Cisco UCS B200 M3 and B200 M4 servers
  • Fusion IO ioMemory for B-series and C-series servers
  • LSI Nytro MegaRaid NMR 8110-4i for C240 M3 server
  • NVIDIA Tesla K40 GPU accelerator for C-Series Servers
  • Emulex OCE14102 CNA
  • FX3S Support
  • 10GB TwinAx cables (1m, 2m, and 5m)
  • 10GB AOC cables (1m, 2m, 3m, 5, 7m, and 10m)

Release 2.2(2c) adds support for the following:

  • B22 M3 servers shipping with Intel E5-2400 v2 CPUs.
  • B420 M3 servers shipping with Intel E5-4600 v2 CPUs.
  • B260 M4 servers shipping with two Intel E7-2800 v2 or E7-4800 v2 or E7-8800 v2 CPUs.
  • B460 M4 servers shipping with four Intel E7-4800 v2 or E7-8800 v2 CPUs.
  • C22 M3/C24 M3 servers shipping with Intel E5-2400 v2 CPUs.
  • C460 M4 servers shipping with two or four Intel E7-4800 v2 or E7-8800 v2 CPUs.
  • Chassis with updated backplane and High Voltage DC support (200v DC - 380v DC) - UCSB-5108-HVDC

Release 2.2(1b) adds support for the following:

  • Chassis with updated backplane UCSB-5108-AC2 or UCSB-5108-DC2

New Software Features in Release 2.2

Release 2.2(3a) adds support for the following:

  • Tiered Port-Licensing for direct-connect C-Series servers
  • Smart Call Home Enhancements
  • BIOS/CIMC secure boot support for C-series servers
  • DIMM blacklisting support for C-series servers
  • ENIC - DPDK Integration
  • Stateless Offload for Overlay Networks (NVGRE / VXLAN)
  • Monitoring of the IOM/FI interfaces
  • LAN and SAN topology information
  • usNIC support for IP-routable transport

Release 2.2(2c) adds support for the following:

  • Scriptable vMedia
  • NetFlow support
  • PVLAN Enhancements
  • Pre-Upgrade Validation Checks
  • GPU Firmware Management
  • Wear-Level Monitoring on Flash Adapters
  • KVM/vMedia Client Enhancements
  • Cisco VIC Driver Enhancements:

Adaptive Interrupt Coalescing (AIC)

Accelerated Receive Flow Steering (ARFS)

netQueue Support

  • Support for ‘ lacp suspend-individual ’ on Uplink Port-Channel

Release 2.2(1b) adds support for the following:

  • IPv6 Management support
  • Cisco Integrated Management Controller (CIMC) In-band Management
  • Fabric scaling: VLAN, VIFs, IGMP, Network Adapter Endpoints
  • Uni-Directional Link Detection (UDLD) support
  • User Space NIC (usNIC) for Low Latency
  • Support for Virtual Machine Queue (VMQ)
  • C-Series Servers Direct Connect to FI without FEX
  • Two-factor Authentication for UCS Manager Logins
  • VM-FEX for Hyper-V Management with Microsoft SCVMM
  • Direct KVM Access
  • Server Firmware Auto Sync
  • Enhanced Local Storage Management
  • Flash Adapters and HDD Firmware Management
  • Precision Boot Order Control
  • Secure Boot (B-series only)
  • UEFI Boot Support
  • FlexFlash (Local SD card) support
  • Trusted Platform Module (TPM) Inventory
  • DIMM Blacklisting and Correctable Error Reporting (B-series only)
  • C-Series Board Controller Firmware Management
4 REPLIES
VIP Red

Hallo Hugohttp://www.cisco

Hallo Hugo

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/ucs_2_2_rn.html

First Published: December 12, 2013
Last Updated: September 15, 2014
Part Number: OL-31127-01

Check table 1: Online Change History

Gruss Walter.

New Member

Hi wdey,yes, I checked it,

Hi wdey,

yes, I checked it, but there are only there lines with information about 2.2(1b) and 2.2(1c). Last entry is from February, 9 2014.

I cannot find some new information about changes in 2.2(1d), 2.2(1e), 2.2(2c), 2.2(2d) and 2.2(3a).

You know what I mean? By the way 2.2(2c) is recommend by Cisco.

 

MfG, best regards

/Hugo

VIP Red

I cannot find some new

I cannot find some new information about changes in 2.2(1d), 2.2(1e), 2.2(2c), 2.2(2d) and 2.2(3a).

Did you check the section "new hardware features in 2.2" new software features in 2.2" in the same document I was referring to ?

New Hardware Features in Release 2.2

Release 2.2(3a) adds support for the following:

  • Cisco UCS B200 M4 servers shipping with Intel E5-2600 v3 series CPUs
  • Cisco UCS C220 M4/C240 M4 servers shipping with Intel E5-2600 v3 Series CPUs
  • Cisco UCS VIC 1227 adapter modular LOM (mLOM) for Cisco UCS C220 M4 & C240M4 servers
  • Cisco UCS VIC 1340 and VIC 1380 adapters modular LOM (mLOM) for Cisco UCS B200 M3 and B200 M4 servers
  • Fusion IO ioMemory for B-series and C-series servers
  • LSI Nytro MegaRaid NMR 8110-4i for C240 M3 server
  • NVIDIA Tesla K40 GPU accelerator for C-Series Servers
  • Emulex OCE14102 CNA
  • FX3S Support
  • 10GB TwinAx cables (1m, 2m, and 5m)
  • 10GB AOC cables (1m, 2m, 3m, 5, 7m, and 10m)

Release 2.2(2c) adds support for the following:

  • B22 M3 servers shipping with Intel E5-2400 v2 CPUs.
  • B420 M3 servers shipping with Intel E5-4600 v2 CPUs.
  • B260 M4 servers shipping with two Intel E7-2800 v2 or E7-4800 v2 or E7-8800 v2 CPUs.
  • B460 M4 servers shipping with four Intel E7-4800 v2 or E7-8800 v2 CPUs.
  • C22 M3/C24 M3 servers shipping with Intel E5-2400 v2 CPUs.
  • C460 M4 servers shipping with two or four Intel E7-4800 v2 or E7-8800 v2 CPUs.
  • Chassis with updated backplane and High Voltage DC support (200v DC - 380v DC) - UCSB-5108-HVDC

Release 2.2(1b) adds support for the following:

  • Chassis with updated backplane UCSB-5108-AC2 or UCSB-5108-DC2

New Software Features in Release 2.2

Release 2.2(3a) adds support for the following:

  • Tiered Port-Licensing for direct-connect C-Series servers
  • Smart Call Home Enhancements
  • BIOS/CIMC secure boot support for C-series servers
  • DIMM blacklisting support for C-series servers
  • ENIC - DPDK Integration
  • Stateless Offload for Overlay Networks (NVGRE / VXLAN)
  • Monitoring of the IOM/FI interfaces
  • LAN and SAN topology information
  • usNIC support for IP-routable transport

Release 2.2(2c) adds support for the following:

  • Scriptable vMedia
  • NetFlow support
  • PVLAN Enhancements
  • Pre-Upgrade Validation Checks
  • GPU Firmware Management
  • Wear-Level Monitoring on Flash Adapters
  • KVM/vMedia Client Enhancements
  • Cisco VIC Driver Enhancements:

Adaptive Interrupt Coalescing (AIC)

Accelerated Receive Flow Steering (ARFS)

netQueue Support

  • Support for ‘ lacp suspend-individual ’ on Uplink Port-Channel

Release 2.2(1b) adds support for the following:

  • IPv6 Management support
  • Cisco Integrated Management Controller (CIMC) In-band Management
  • Fabric scaling: VLAN, VIFs, IGMP, Network Adapter Endpoints
  • Uni-Directional Link Detection (UDLD) support
  • User Space NIC (usNIC) for Low Latency
  • Support for Virtual Machine Queue (VMQ)
  • C-Series Servers Direct Connect to FI without FEX
  • Two-factor Authentication for UCS Manager Logins
  • VM-FEX for Hyper-V Management with Microsoft SCVMM
  • Direct KVM Access
  • Server Firmware Auto Sync
  • Enhanced Local Storage Management
  • Flash Adapters and HDD Firmware Management
  • Precision Boot Order Control
  • Secure Boot (B-series only)
  • UEFI Boot Support
  • FlexFlash (Local SD card) support
  • Trusted Platform Module (TPM) Inventory
  • DIMM Blacklisting and Correctable Error Reporting (B-series only)
  • C-Series Board Controller Firmware Management
New Member

ehm ok, I found it in the PDF

ehm ok, I found it in the PDF, but not in the "online" version. I have to download the PDF. After I can see all the new changes.

 

/Hugo

340
Views
0
Helpful
4
Replies