I have a setup with 2 Nexus 5548's connected over a vpc peer link and a keepalive, These two nexus switch's have a standard VPC connection to an upstream 6500. this is working fine,
Then there are multiple native FC connections from the 5548's to 6248's. I know there is the option to configure FC port-channel's on the UCS 2.0 but is it possible to put fc interfaces of the nexus 5548 into a san port-channel across a vpc between the the nexus 5548's.
so for example, can i port-channel the following across a vpc or is a san port-channel restricted to ports on the same nexus switch only.
Fabric A fc1/31 & fc1/32 uplinked to -> NX5K-1 Port fc1/31 & NX5K-2 Port fc1/32 (san port-channel 10 over a VPC)
Fabric B fc1/31 & fc1/32 uplinked to -> NX5K-1 Port fc1/32 & NXFK-2 Port fc1/31 (san port-channel 11 over a VPC)
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...