Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UCS server c240 m3 raid 10 with backup disk.

Hello,

I have c240 ucs with raid 10 ( 6 disk) + one disk  not configured. Is it possible configure that disk to automaticaly replace when disk in raid die? Something like hot standby.

If there is no such a feature,  what is procedure when one of disk stop working in raid 10  (raid controler software) - or just replace corrupted disk with new one ?

 

thanks,

  • Unified Computing
2 REPLIES
New Member

Hello, When you setup a UCS

Hello,

 

When you setup a UCS server freshly you will have to go through the process of creating RAID and in this case it is achieved by LSI Megaraid utility. So in case if you have RAID 10 running on the server the feature of RAID itself is giving the standby capability if a hard drive fails.

So in case out of 6 HDDs one is failing you will still be able to sustain without any impact, but if 1 more fails then your complete data is lost.

 

Regards

Krishna 

New Member

I have found what I was

I have found what I was looking for thanks to http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/raid/configuration/guide/RAID_GUIDE.pdf document.

This option is called Global Hot Spare. Additional disk can be configured with this via CIMC interface.

 

regards,

144
Views
0
Helpful
2
Replies
This widget could not be displayed.