Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Ucs Server Raid

I bought new cisco ucs C220 M3 server and install esx from cisco custom iso

But when i run esx ten minutes later system down . And storage adapter missing . Like photo

http://prntscr.com/3k48wg

 

http://prntscr.com/3k4fmt

 

 

Everyone's tags (2)
3 REPLIES
Community Member

Hi, most probably your UCS

Hi,

 

most probably your UCS server firmware needs an update as this was a common issue in the older release.

 

Please check the document URL:

 

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/OL-31202-01.html#pgfId-543961

 

i.e.

 

Release 1.5(4e)

Following defect was resolved in Release 1.5(4e):

BIOS

Symptom For systems that use the LSI SAS 2008 Mezz, LSI 9240 and 9220 PCIE adapters, when IOMMU is enabled on these systems:

  • Server crashes while booting.
  • RAID volume corruption occurs.

Workaround None. (CSCun30636)

 

hope this makes your day

Community Member

Thank khalid.ibrahim We are

Thank khalid.ibrahim 

We are try ing to update firmvare  during  23 day only show this screen http://prntscr.com/3r4wi5 

 

Community Member

Hi,i know the following might

Hi,

i know the following might seems odd, but have you followed the instruction of upgrading the firmware. have you used the one on the flexFlash or from ISO file boot loader.

i believe i have run so many servers Cisco's non of them has stopped or hanged while loading.

 

this is maybe your good luck so you will explore a new issue that cisco can fix.

 

i would be happy to help you if just you can list the steps you e=went through to upgrade the firmware or even remote login.

 

BR,

 

Khalid

116
Views
0
Helpful
3
Replies
CreatePlease to create content