cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1733
Views
0
Helpful
1
Replies

ucs uplinks 4500X VSS

rgzoso211
Level 1
Level 1

New deployment of a pair of 4500X in VSS mode and Cisco UCS.

FI-A has 1 10G link to each 4500X

FI-B has 1 10G link to each 4500X

How should the ports and port channels on the 4500X be configured for UCS uplinks?

1 Reply 1

richbarb
Cisco Employee
Cisco Employee

Hi Reed,

In the end you will just create two port channels, one to each FI.

This is the documentation to create etherchannel on 4500X.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/15.02SG/configuration/guide/channel.html#wp1020670

The interfaces "Ten 1/1" of each 4500X will be part of the first etherchannel andin the second the interfaces "Ten 1/2". (This is just a representation not the real interface number).

Remeber to use the mode active (LACP) of the etherchannel, because this is enabled by default in the Fabric Interconnects.

Richard

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: