08-21-2012 04:26 PM - edited 03-01-2019 10:34 AM
Hello,
Anybody know if theres any way to make a UC460 to be installed with one hard drive only?. I didn't realized this servers are coming without the RAID card.
Best regards.
Victor
Solved! Go to Solution.
08-21-2012 04:52 PM
Hi Victor,
To the best of my knowledge you need a RAID card installed in the riser to use the hard drives as there is no onboard SAS chipset.
Here is the spec sheet with the applicable part numbers for the RAID controllers:
http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/spec_sheet_c17-644207.pdf
08-21-2012 04:52 PM
Hi Victor,
To the best of my knowledge you need a RAID card installed in the riser to use the hard drives as there is no onboard SAS chipset.
Here is the spec sheet with the applicable part numbers for the RAID controllers:
http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/spec_sheet_c17-644207.pdf
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: