Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UCS460 M1 with single drive

Hello,

Anybody know if theres any way to make a UC460 to be installed with one hard drive only?. I didn't realized this servers are coming without the RAID card.

Best regards.

Victor

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

UCS460 M1 with single drive

Hi Victor,

To the best of my knowledge you need a RAID card installed in the riser to use the hard drives as there is no onboard SAS chipset.

Here is the spec sheet with the applicable part numbers for the RAID controllers:

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/spec_sheet_c17-644207.pdf

1 REPLY
Cisco Employee

UCS460 M1 with single drive

Hi Victor,

To the best of my knowledge you need a RAID card installed in the riser to use the hard drives as there is no onboard SAS chipset.

Here is the spec sheet with the applicable part numbers for the RAID controllers:

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/spec_sheet_c17-644207.pdf

265
Views
0
Helpful
1
Replies
CreatePlease to create content