UCSM 2.2.2c Direct Connect C240 M3 internal hard drive question
I have 4 C240 M3s with the vic 1225 being managed by UCSM and that is working fine...
I am going to boot ESX 5.5 from flexflash SD cards in the C240s...I read that is now supported..
I want to use the internal raid controller with 2 volumes for ESX VSAN...one volume is supported, but I read in old(er) UCSM 2.,2 documentation that only 1 raid controller with 1 raid volume were supported. That's is from December 2013
Does the new version of UCSM 2.2.2c support multiple raid set/volumes on the one raid controller?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...