Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UCSM Intergation and C-Series Disk Mirroring

Our UCSM managed C240's have multiple disks. Can we do the following:

1) Create a RAID 1 LUN for OS

2) Create a RAID 5 with the remainder of the disks for data

Can this be done with a policy in UCSM? We have single-wire management configured.

Thanks

Everyone's tags (1)
1 REPLY

UCSM Intergation and C-Series Disk Mirroring

Terry,

You can do this but the server needs to be in standalone mode first, then during post you can access WebBIOS (Ctrl+H depending on which controller you have) or if your server is running  1.5 CIMC firmware, then you can do that from CIMC without having to reboot to enter anywhere else.

Bottom line, that can be done but not through UCSM.

Rate ALL helpful answers.

-Kenny

178
Views
0
Helpful
1
Replies
CreatePlease login to create content