I have two FI 6140xp, 11 chassis, and i´m planning to upgrade its UCSM and firmware, from 1.4(L) through 2.0(5) but i need to know if this is the last stable version (2.0(5)), or if exists another upper stable version.
I wanted to add that the latest release will include the most resolved caveats, and you'll also want to ensure that once you upgrade the firmware, you upgrade any OS / Hypervisor ENIC and FNIC drivers as well. As Kenny and Manuel pointed out, read the release notes and check with your System Engineer before making a decision to move forward. Please also remember to read and resolve any "gotcha's" outlined in the release notes before upgrading.
Take Special Note of this Section:
"Cautions, Guidelines, and Limitations for Firmware Upgrades"
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...