When the hypervisor partition is not sync between the two SD cards, you will see an error message on the CIMC under the Storage tab after you select Cisco Flexflash controller. Note that this feature became available after firmware version 1.5, so if your servers are running code prior to that the raid configuration between the SD cards won't be available.
Please let me know if this help and rate any helpful post.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...