My Service Profiles are configured as Boot from SAN. The vHBAs Login to the Brocade Fibre Channel Fabric and are can be zoned as required.
My ESXI Hosts will require access to other Luns on the Storage. A further 2 vHBAs have been added to the Service Profile for this reason. However they never Login to the Brocade Fabric and therefore cannot be zoned.
Any ideas why they do Login to the Fabric would be appreciated.
You should see the WWNs at the FIs first, run the following command.
# conn nxos
# sho npv flogi-table
IMHO, the additional vHBAs and not necessary unless some sort of security requirements or these vHBAs will beassociated to a different vSAN than your boot LUNs. If all the storage is coming from the same array, drop the other vHBA.
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...
RBAC users like email@example.com may fail HX Connect login. At that time, "Incorrect user name or password(100005)" is shown as a failure reason.
RBAC users can login to vCenter server. So, RBAC username and passwo...