We tried to install Meeting-Place 8.5.2 on svl-ucs-02 and encounter the VMware Licensing issues.
As per current Licensing provided by Cisco for Meeting-Place bundle on UCS C210-MT server, we have 8vCPU on each UCS server, but it supports only 4 vCPU for a single VM, if we try to allocate the more than 4 vCPU to single VM its doesn’t start the VM and gives the License Warning.
Below is the Minimum Hardware requirement for Meeting-Place 8.5 :-
Installing the Application Server on a Virtual Machine
If you are planning to install the Application Server on a virtual machine, then note the following: •(Cisco UCS C210 M2 Server or UCS B-Series Server) The virtual machine must have 8 vCPU (2.66 GHz), 8 GB RAM, and a 300GB hard drive. •(Cisco UCS C200 M2 Server) The virtual machine must have 4 vCPU (2.66 GHz), 8 GB RAM, and a 300GB hard drive.
If your virtual machine does not meet these requirements, then you will see an error message and the installation program terminates.
Note:- we tried to install with 4 vCPU and as stated above its terminates the installation process after verifying the available hardware for VM
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...