VMware LINT1 motherboard interrupt. This is a hardware problem; please contact you hardware vendor
I got a problem with 3 Cisco UCS C460 M2 that is using VMware ESXi 5.0, the problem is that the servers work fine for 2 or 3 days and after that display a purple screen with the message "LINT1 motherboard interrupt. This is a hardware problem; please contact you hardware vendor".
We have Raised a case with Cisco TAC and VMware to found the issue and after several updates of BIOS, Drivers and Firmware we still having the same Issue.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...