10-09-2014 06:12 AM - edited 03-01-2019 11:52 AM
Hello,
we are using Cisco UCS C220M3 with VIC 1225 and Nexus 5548UP. Creating vethernet with autocreate works fine. Now we need to rate Limit the nics or build "smaller" nics than 10 GIG using Adapter Fex.
In the Properties of the vnic there are the rate-Limit fields, but they are set as "n/a". Is there any way to build some kind of real virtual GE or FE Cards or do I have to use Qos to get this running?
Thanks in advance,
Andreas
Solved! Go to Solution.
10-14-2014 07:15 AM
Kurti, this may help. starting on Page 5
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-4-1/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141_chapter_01001.pdf
10-14-2014 07:15 AM
Kurti, this may help. starting on Page 5
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-4-1/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141_chapter_01001.pdf
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: