Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

vNIC Rate Limiting option

Hello,

we are using Cisco UCS C220M3 with VIC 1225 and Nexus 5548UP. Creating vethernet with autocreate works fine. Now we need to rate Limit the nics or build "smaller" nics than 10 GIG using Adapter Fex.

 

In the Properties of the vnic there are the rate-Limit fields, but they are set as "n/a". Is there any way to build some kind of real virtual GE or FE Cards or do I have to use Qos to get this running?

 

Thanks in advance,

 

Andreas

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

  Kurti, this may help.

 

 

Kurti, this may help. starting on Page 5

 

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-4-1/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141_chapter_01001.pdf

1 REPLY
Cisco Employee

  Kurti, this may help.

 

 

Kurti, this may help. starting on Page 5

 

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-4-1/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141_chapter_01001.pdf

30
Views
0
Helpful
1
Replies