Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

What kind of PDU do folks like for the UCS?

I am planning to deploy UCS in the next month or so.  It sounds like each UCS chassis requires four L6-20 receptacles.

And we're getting two chassis.  So I was looking to get a couple of Pulizzi like the onces below.  Anyone prefer another

type for better managability or other reasons?  Also - is the L6-20 the only power option for the UCS?  Thanks.

http://powerquality.eaton.com/ePDU-LPC208-2P.aspx?cx=3

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

What kind of PDU do folks like for the UCS?

There is a 110 plug into a specialized PDU in the rack.  Check with your Cisco rep for the part number - it works great.  We deployed approximately 100 chassis and this worked very well.

Linda

3 REPLIES
New Member

What kind of PDU do folks like for the UCS?

There is a 110 plug into a specialized PDU in the rack.  Check with your Cisco rep for the part number - it works great.  We deployed approximately 100 chassis and this worked very well.

Linda

New Member

What kind of PDU do folks like for the UCS?

I used to be an APC guy, but really liking this company these days http://www.servertech.com/products/pops-per-outlet-power-sensing/pops-switched-cwg-30vd-vy-3ph-20-30a-busway-24xc13-6xc19-with-pips

You can monitor and admin Much Better, and these PDU's can be set to turn off during thermal events.

Craig

My UCS Blog http://realworlducs.com

What kind of PDU do folks like for the UCS?

Does this PDU work in most standard cabinets, like an APC?

606
Views
0
Helpful
3
Replies
CreatePlease to create content