Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WIN server 2008 For UCS 200

Good Day,

we have a UCS 200 and we tri many time to install WIN server 2008 ent.

but   every time we face a problem, which " we get a error massage that is  the computer restarted unexpectedly or encountered an unexpected error.  Windowos installation cannot proceed. To install Windows. click "OK" to  restart the computer. and restart the installation " after that no thing  happen.

can any body help me about this issues or told me how we can install WIN Server in UCS 200

  • Unified Computing
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

WIN server 2008 For UCS 200

Hello Elsayed,

Please provide us additional information to know about your setup

Are you performing installation to local hard disks or SAN ?

Complete version of Windows OS and CIMC version

At what stage of installation do you receive the above error message ?

Did you verify the checksum of the ISO image ?

Padma

5 REPLIES
Cisco Employee

WIN server 2008 For UCS 200

Hello Elsayed,

Please provide us additional information to know about your setup

Are you performing installation to local hard disks or SAN ?

Complete version of Windows OS and CIMC version

At what stage of installation do you receive the above error message ?

Did you verify the checksum of the ISO image ?

Padma

New Member

WIN server 2008 For UCS 200

Hi Padma,

now i removed the NIC and install WIN server 2008 R2 (64 bit ), it is succeed .

but i face another problem i try to install CSM 4.0 , i get the attache error massage

so do you have any idea for this issues

Cisco Employee

WIN server 2008 For UCS 200

Elsayed,

So did you just reseat the NIC card or completely removed it ? What NIC card do you have on the server ?

I do not have much knowledge about CSM. As per the error message and following doc, terminal services should be disabled on your Windows OS for successful installation of CSM

STEP 4

http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.2/installation/guide/servprep.html#wp1043342

HTH

Padma

New Member

WIN server 2008 For UCS 200

Padma,

frist i removed it and after installion i reconnect NIC again.

kindly how can i disable Terminal Services.


Cisco Employee

WIN server 2008 For UCS 200

Elsayed,

Generally speaking, you can start / stop / disable the services from services management console

start > run > services.msc and then look for terminal services.

Since this is specific to CSM application installation, you might want to check with people / forum board who are more knowledgeable in it to confirm if this is the real issue that prevents your installation or not.

Padma

499
Views
0
Helpful
5
Replies