Does the Cisco Integrated Management Controller (CIMC) support the WS-Management (WS-MAN) SOAP-based protocol for server management? In particular, I'm wondering if the C-200 or C-250 rack servers with CIMC can be controlled (power state changes, status, SEL, etc.) using a custom management application that uses WS-MAN.
From what I've been able to determine the CIMC only offers SMASH 1.0 which is the command-line protocol. I was hoping to have programmatic access via web service using the SMASH 2.0 standard. The only machines I've been able to find that seem to support it are Dell PowerEdge servers.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...