Hello, I updated my ASA 5512 to ASA 9.8(1), ASDM 7.8(1). I'm unable to edit site to site connection profiles. I can enter information in the "Basic" section, but I can't enter "Advanced -> Crypto Map Entry" and "Tunnel Group". The form just doesn't ...

Hi, I'm trying to set up a site to site vpn. Site A (local): 192.168.2.0/24, external IP 81.14.x.x. (CISCO ASA 5512) Site B (remote): 192.168.5.0/24, dynamic external IP IPsec Tunnel comes up nicely, data is transferred both ways. I can't ping all of...

I have a network with two isps annd two firewalls. The config is as follows: Firewall 1 (Netgear) providing internet access via Gateway 192.168.2.40Firewall 2 (ASA 5512) providing Internet access and VPN services via Gateway 192.168.2.45 What I try t...

I'm trying to built a site to site VPN between a TP-Link TL-R600VPN and an ASA 5512 running ASA 9.6(2) and ASDM 7.6(2)150. I managed to complete phase 1 succesfully. Phase 2 fails due to "All IPSec SA proposals found unacceptable!" The error occurs ...

Hello, when trying to build a site to site vpn I encounter the following problem:80.xx.xx.xx, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 192.168.0.0/255.255.255.0/0/0 local proxy 192.168.2.0/255.255.255.0/0/0 on interface ...