Hi,
I need to achieve different level of remote vpn user access for the network.
I do have Cisco ASA 5520 (SSL VPN) that max support IOS version 9.1.x. It does not support 9.2.x so It does not support CoA (posturing & remediation).
http://www.cisc...
Hi, My question is to use policy based service insertion/service graphs between the EPGs communications to redirect traffic to ASA firewall & F5 slb. Below are Cisco ACI components:1- Spines & Leafs2- APIC Controllers3- Cisco ASA Firewall attached t...
Hi, If my ACI is acting as layer 2 for the EPGs and Firewall is connected to ACI acting as a gateway for all the EPGs connected to the ACI.Do I really need to have one BD for one EPG or Can I have multiple EPGs in the same BD If I want? We need to en...
Hi,I am considering to plan for the stretch fabric design over full meshed or separate fabrics in the three data centers located within 300 meters of range from each other and possibly huge fibers are available to interconnect them.All three data cen...
Hi, I have a requirement to span some sources to the remote destination(recorder). Both sources and destination are in different subnets connected to different switches. Sources are connected to "WS-C3750-48P 12.2(50)SE1 C3750-IPSERV...
C9400 and C9500 are supporting StackWise Virtual: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-6/configuration_guide/b_166_ha_9500/b_166_ha_9500_chapter_01.pdf
Regards,
Anser
Hi,
Is Cisco AMP for Endpoints in the Citrix VDI users (windows user) running on Nutanix Acropolis Hypervisor supported?
I need to know what licenses do I need other than AMP Endpoints Licenses and how this integration works?
As I heard from Cisc...
Hi,
Can I upgrade expired wireless license running on Cisco ISE 1.2 version to newly ordered license i.e. Mobility upgrade or Do I need to first migrate wireless license to mobility license then go for mobility upgrade?
Actually existing wireless ...
Hi Mike,
Did you get a chance to check the compatibility of QSFP-4X10G-AOC10M with ASA5585 with N9K?
I want to connect ASA5585-S20F20-BUN (10G interfaces) with N9K-C9372TX-E (40G interfaces) by using QSFP-4X10G-AOC10M.
Regards,
Anser
