About Peter Marshall

Peter Marshall · 01-25-2024

Designing a new location isn't that difficult. There are plenty of stencils, but some of the ones at Cisco either don't exist or are wrong. Please make stencils a priority when assigning part numbers. The stencils here:Switches-Cisco Nexus 9000 (ZIP ...

Peter Marshall · 01-25-2024

My rep advised me to go to this link: cisco.com/web/fw/tools/ssue/apps/ssueap2.0/prod/#/promo and that works. However, the links from that site do not work.

Peter Marshall · 04-16-2019

I keep getting locked-out of my switch when I make the following configuration changes per Impulse Safe Connect. I'm wondering if anyone else has dealt with this issue. The supplied text files show a typical switch configuration in the 'test.switch.b...

Peter Marshall · 12-23-2015

Anyone keen on QoS care to give a critique to what I've come up with here? Router Configuration: class-map match-any DATA match dscp af43 match dscp af31 af32 af33 match dscp af21 af22 af23 match dscp af11 af12 af13class-map match-any SIGNAL ma...

Peter Marshall · 04-17-2019

Georg, this worked.For anyone else testing a similar scenario, it took my a good 30 seconds to log into my WS-C2960X-48LPS-L, running 15.2(2)E7 C2960X-UNIVERSALK9-M, since it's off the network (cannot reach the RADIUS server).Thanks!PS: "aaa authenti...

Peter Marshall · 01-22-2019

I don't want to assume anything, but are you able to get access to the network via that 6509?If yes, troubleshoot from the 6509. If not, there may be other issues, such as a firewall or restrictive ACL. If you can get on that network, do an "ipconfig...

Peter Marshall · 01-22-2019

This article covers the topic fundamentals: https://learningnetwork.cisco.com/thread/20426 As for this, question, "If DTE-DCE cable is replaced by T1, do I still need to put clock rate and bandwidth on router A?" If you have T1 cards, you'll need a...

Peter Marshall · 02-02-2018

Great suggestions from everyone. Regarding VTP, if your orgainization uses it, then make sure your devices meet the standard. If you organization does not use it, then either disable VTP, or set the VTP mode to transparent. That should end the great ...

Peter Marshall · 06-22-2016

We played with some of the errdisable settings which will be removed when this switch and others move to production. Most remote sites won't need fiber, so we're also getting rid of all udld commands. I have bpduguard enabled on pretty much all my pr...

Member Since	‎09-16-2010 11:13 AM
Date Last Visited	‎02-14-2024 12:05 AM
Posts	26
Total Helpful Votes Received	45

User Statistics

User Activity

Focus on hardware and Visio stencils

The site doesn't work

Impulse Safe Connect implementation

Looking for a Cookie-cutter QoS configuration

Re: Impulse Safe Connect implementation

Re: issue with switch

Re: Bridging Over a Wide Area Network using dte dce cable

Re: Network Design

We played with some of the