gavin.tobin
Level 1
Level 1
Member since ‎02-24-2009
‎08-18-2017

User Statistics

  • 20 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

Hello,Any chance of enabling a LAN ONLY mode in the next UC320W firmware so that it does not have to be the gateway for the phone network?It's predecessor the SPA9000 had this capability and worked fine. I like the UC320W but don't want to use it as ...
Hello,About to purchase the UC320W and had a quick look at the online emulator.Plan to use with a single analogue trunk and also a SIP trunk. Is it possible to have a separate steering digit for the outside line, ie dial 8 for outside analogue trunk ...
Hello,I currently have a SPA9000/SPA400 on a vlan/subnet behind an existing non-cisco firewall / router. I am looking for more functionality and reliability and have acquired a UC520 which I plan to swap for the SPA combo.I have seen a document for p...
Hello,Have a SPA900 connected to a SPA400 with a single analogue line plugged into Port 1 of the SPA400.If we make a call through the SPA400 the person called hears a very choppy call like a very bad SIP call.Found the support document on choppy SPA4...
Hello,I have a SPA400 in place for years but was only using it for voicemail which worked great.Lately I needed to reconfigure it to work with a single analogue line plugged into Line 1. But the SPA400 showed the line as On-Hook with 0V (somethimes i...
Community Statistics
Member Since ‎02-24-2009 03:25 AM
Date Last Visited ‎08-18-2017 04:00 AM
Posts 20