About rubenlopezsalinas

rubenlopezsalinas · 08-08-2014

we want separate the traffic depending on source, for this theme use two vrf (NAT1 and NAT2) and one cgn service, now we have ok the config for NAT 1 but the config NAT2 no is ok, no generate translations, someone have some idea of my error.Config.vr...

rubenlopezsalinas · 12-13-2013

Hi all.I have one question, how can activate license for CGN in CRS-3.I testing whit this command.RP/0/RP0/CPU0:(admin-config)#license XC-XLAT44-5M location 0/3/CPU0In linecard 0/3/CPU0 is my CGN NAT, after of config RP/0/RP0/CPU0:(admin-config)#lic...

rubenlopezsalinas · 02-25-2014

Hi Somnath, I have in production my CGN but yet I don't see that license be active with traffic, you have some idea because this.RP/0/RP0/CPU0:#sh cgn nat44 NAT44 statistics Wed Feb 26 11:53:09.010 SCLStatistics summary of NAT44 instance: 'NAT44'Nu...

rubenlopezsalinas · 12-27-2013

Hi Somnath, I understand you request, if I have Licence for 5MM of traslation why I don`t Active Licence. how I safe me this operation is ok and not have a problem in production.Thank.

rubenlopezsalinas · 12-27-2013

Hi Rivalino, I test with you say, but no see change in show.my test.ping from Edge to Internet (Edge-Core-Crs) ---->the NAT is ok, the linecard generate the NAT. OKBut I don`t see that Licence is Active. same result that first show.Thank.

rubenlopezsalinas · 05-23-2008

hi, no ingles solo espaÃ±ol, check security level the interface.ByeRuben.

Member Since	‎05-23-2008 06:36 AM
Date Last Visited	‎07-09-2021 12:30 AM
Posts	6

User Statistics

User Activity

CGN in CRS with two VRFs no Work

Activate license for CGN NAT

Activate license for CGN NAT

Re: Activate license for CGN NAT

Re: Activate license for CGN NAT

Re: Nat in Pix 515