I am looking to convert a pair of 6513s w/ dual MSFC2s from config-sync to SRM high availability modes. Does anyone know of a procedure to follow?Should I:1. Disable high avail (config-sync)2. Clear config on second MSFC3. Mod config to remove all "...

Can UDLD be used with GIGAstack stacking GBICs to protect against undirectional data flows within a stack of switches? I was wondering if the protocol could handle seeing more than one switch on the other end of a link.

In reviewing a network’s GIGAstack cabling I have noted a few closets with cable configurations that do not match recommendations. The recommendations for connecting switches w/ a redundant connection is that you chain port 2 from one switch to por...

I am currently looking at a net that is experiencing loops due to STP failures. In looking at the core/dist configs (65xx’s) Backbonefast is set but at the access layer (2950’s) Backbonefast is not set. All recommendations I have seen is that Backb...

We have a 7206 configured with a PA-VXC-2TE1 and PA-MC-2T1 ... One port if the VXC is allocated to PBX connectivity (in support of VoIP) and the two ports of the MC-2T1 are allocated for IP routing in support of remote 3640s. We would like to config...