About John

John · 11-05-2002

We have a Pri circuit terminated to a vg200 gateway into a callmanager 3.1 server. We have a VG-248 unit connected to a few fax machines. We have intermittent but continuing problems with certain fax machines when they try and send a fax to us. I ...

John · 10-01-2002

This is a weird one. When a call is placed only to a cellphone where we get the message (please wait while we locate the subscriber) the phone drops the call intermittently. Normal calls are fine. We are connect to the pstn through a 4000 blade an...

John · 10-01-2002

We have a new installation of callmanager. We had to start with 3.08 and then upgrade to 3.0(12). Then we went to 3.2(2c). The publisher install went fine. When we try to install the subscriber the same way applying all of the hotfixes and sql up...

John · 10-01-2002

I have a new installation of callmanager 3.2(2c). Normal calls are very clear, but as soon as a 3-way conference is started severe clipping is heard by all parties. We have setup a software conference bridge, a hardware conference bridge and also ...

John · 10-09-2002

This may sound weird, but we had a similar problem in our lab. We had a dialing pattern of @ to handle all national calls without an access code. This dialing pattern caused our mwi lights to not light at all or intermittently. I mention this beca...

John · 10-08-2002

It is a good practice to never use extesions in the 0XXX range for this very reason. Once you use "0" as a digit to your operator, you would effectively eliminate anything following the "0" as a valid extension 0xxx. To save time later on you shoul...

John · 08-19-2002

also don't forget to assign the dial pattern to a partition and assign to the call search spaces you want to block from dialin this number. We used this to block peoples calling card numbers.

John · 07-11-2002

What is the reason for the two digit extension. Standards are 4 or 5 digit extensions. If you use 34 then you use all numbers starting with 34xxx. This is not a problem on external calls, but should be avoided on internal numbering plan. Talk to ...

John · 07-09-2002

We have a hi-end executive suite callmanager installation that requires a billing system. We use the ISI/Infortel system. It is designed for the callmanager and has worked well for about 4 months. Maybe this will help you .

Member Since	‎10-26-2001 11:13 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	25

User Statistics

User Activity

incoming fax problems

call drop when calling cellphone and it searches

Subscriber installation problems

Clipping on 3-way conference

Re: MWI lights "stuck" after complete 48 hour shutdown

Re: Dial 0 or 0# to Reception

Re: block 1010

Re: pound key doesn't work within internal call

Re: "Third-party billing software"