About kanchand

kanchand · 11-16-2010

Hi All,My Switch is c2950 and i am trying for a MAb Authentication using ACS .Please let me know will this switch supports and if not is there any way how to use this switch for MAb authentication.System image file is "flash:/c2950-i6q4l2-mz.121-22....

kanchand · 10-28-2010

I have a ACS 5.0 and a router C5940 tried to authenticated it. When i put a debug tacacs the router displays "write to 11.1.1.5 failed with errno 257((ENOTCONN))" the connectivity is ok but the request doesn´t arrive to acs, the other devices work...

kanchand · 11-03-2010

Yes the router is reachable...Also, I tried a sniffer on the network and confirmed that client/router is sending traffic to port 49 on ACS. ACS does not send to port 49 on client but to the source port for the original message. Infact i checked on ...

kanchand · 10-28-2010

Hi,I have not enabled it .I am getting these messages when i turned on tacacs+ debug in the router*Mar 1 21:31:58.654: AAA/AUTHEN/START (4071980044): Method=tacacs+ (tacacs+)*Mar 1 21:31:58.654: TAC+: send AUTHEN/START packet ver=192 id=-222987252*...

Member Since	‎10-28-2010 12:11 AM
Date Last Visited	‎05-01-2020 12:02 AM
Posts	4

User Statistics

User Activity

whether cisco WS-C2950G-12 switch supports MAb configuration

"write to 11.1.1.5 failed with errno 257((ENOTCONN))"

Re: "write to 11.1.1.5 failed with errno 257((ENOTCONN))"

Re: "write to 11.1.1.5 failed with errno 257((ENOTCONN))"