Hi,You are correct indeed. In NAT order of operation, static translation is the one considered first before dynamic translation. The no nat configuration mentioned by your route-map VPNTunnel is bypassed by the static translations for 80,443 and 1352...
Hi,You have to configure your ASA to do hairpinning (route traffic out of the same interface). This is the command on the ASA:same-security-traffic permit intra-interfacePlus, you need to add a no nat statement on the ASA wherein the traffic is from...
Hi,EZVPN would not allow you to apply that same ipsec client config on different interfaces,Try to check this link focusing on the remote router and adjust the configuration base on your setup:http://www.cisco.com/en/US/products/ps6635/products_white...
Hi,If the ASA outside interface stops sending and receiving, it means that it could not process the packets anymore. There are a lot of issue leading to this behaviour. First, Check if your ASA is having high CPU utilization (greater that 80%), it ye...
Hi,If you do a ping from the router, the traffic would be source on the ADSL interface. Make sure to do an extended ping sourcing on the ethernet interface of the router. The ip address of the DNS server given to your Users must be its private addres...